Surge Cop
Transient Surge Protector
Description
The transient surge suppressor features a two stage protection mechanism that provides overvoltage and surge current protection for 2 wire + 4-20mA current loops. Internally, the module has 100% redundancy to safeguard the system and prevent nuisance failures. This series of modules is for systems using a power supply at the Data Acquisition System end of the twisted pair to power the transducer.
Application
The module has a PROTECTED SIGNAL and POWER side that is connected to the Data Acquisition System input and power supply. It also has a LINE SIGNAL and POWER side that is connected to the transmission wire. The EARTH connection of the modules must be terminated to earth by low impedance heavy gauge wire.
FEATURES
- Hybrid Design
- Reflection of Surge
- Two Stage MOV Suppression
- Wave Form Sloping
- Compact Individual Units
- DIN Rail Mounting
- Clearly Marked Wiring Terminals
- Rising Cage Clamp Screw Terminations
Dimensions
WEG 6 terminal modular housing, #12 to #22 AWG terminals. Size: 60.6 mm x 90.5 mm x 22.5 mm (2.39″ x 3.56″ x 0.89″) (W x H x D excluding DIN Rail)
Operating Conditions
- -40 to +85 C
- 0 to 93% Relative Humidity
Quantity Discounts
4-20 mA Current Loop Surge Protector
Model: SCSP-30VDC-20mA
| Quantity | Price |
| 1 – 5 units | $80/each |
| 6 – 9 units | $75/each |
| 10 – 49 units | $70/each |
*Special discounts for more than 50 units
**Specifications subject to change without notice
